Coastal RainCurtain

FEATURES

• One inlet for all size falls (12"-96" wide)
• Easy to install
• Compact design
• Low water flow requirements
• Self-draining / self-winterization
• No rock trap necessary

This feature can be mounted below the coping in a raised bond beam. With one standard plumbing connector, this feature is easily installed in any type of pool.

• 12" - 60" sizes use 1-1/2" pipe and coupling.
• 72" - 96" sizes use 2" pipe and coupling.

• Standard 1", Extended 6", 9" and 12"

• Standard White
• Optional Black and Gray available at no extra charge.

• It is recommended that your radius is cut when you order.
• If you do cut it yourself, the design of the water feature offers easy cutting due to the segmented spacer support system.

• One gallon per minute, per inch of length, is the standard of sizing pipe and pump.
• Greater projection of the water sheet can be produced with increased flow rates.
• It is recommended to use a dedicated pump and in-line filter with water features over 36" in length.

• Compact design
• One inlet for all sizes (12”-60” uses 1-1/2”, 72”-96” uses 2”)
• Nozzle length from 0”-11” at any angle