PEM 32 MEDIUM / LARGE SPRAY APRON JETS
PEM 32 Spray Apron Spray
Heads are designed to be cast into concrete, flush with surface
installation in unsupervised public playgrounds. The spray head
is vandal resistant, requires a special Wrench to remove nozzle
plate from the body. For ease of installation, the spray heads are
to be mounted upon PEM 538, 3/4" swivel unions. Before pouring
the concrete, the spray heads are to be set to proper level, then
enclosed with a 200mm / 8.0" form. After concrete is cured,
remove forms, turn on water and adjust spray heads to suit, then
grout in spray heads so that they are appr. 1.5mm \ 0.065"
above concrete surface. Spray Aprons are usually supplied with city
water going to waste ( PEM 6094/ 6212, 4" Drain in center of
apron). PEM 32 Spray Heads are made of Brass and Bronze. Standard
Spray Configuration: 12 x 2.4mm\0.094" orifices in a circle
of 35mm\1.375" bored with an outside angle of 5 degrees off
vertical. (Other configurations within the flow capabilty can be
custom made). PEM 32
VERTICAL PERFORMANCES
| SPRAY HEIGHT IN FT. |
SPRAY DIAMETER IN FT. |
FLOW IN GPM |
NOZZLE PRESSURE IN FT. |
| 4.0 |
2 |
10.0 |
6.0 |
| 5.0 |
3 |
12.0 |
7.0 |
| 6.0 |
4 |
14.0 |
8.0 |
| 8.0 |
5 |
18.0 |
11.0 |
| 10.0 |
6 |
22.0 |
16.0 |
PEM 32 SERIES
| PRODUCT |
32 505-2110 |
32+538505-2120 |
| THREAD PIPE SIZE |
3/4" |
3/4" |
| OVERALL HEIGHT |
2.0" |
4.25" |
| OVERALL DIAMETER |
2.50" |
2.50" |
| # OF NOZZLES |
12 |
|
| NOZZLE ORIFICE SIZE |
.094" |
|
| LIST |
$218.22 |
$328.27 |
