English  

Manufacturers

Permalon

Permalon is manufactured as the industries most advanced group of geosynthetic cross laminates and composites. Permalon offers outstanding chemical resistance, weathering characteristics and the highest weight to strength ratio available.

Ideal for pits, quick tank liners, ponds and lagoons, Permalon® materials are factory fabricated up to an acre or more in size. Custom fabrication capabilities also include three dimensional shapes for box and container liners, raceway liners and waterproofing/rehabilitating all manner of structural containers.

Features

  • High density, cross-laminated polyethylene resists punctures and tears
  • UV stabilized to withstand prolonged exposure to sunlight
  • Permalon is not prone to environmental stree-cracking (ESC)so it can endure repeated thermal expansion and contraction cycles
  • Meets ASTM standard D-3083 Soil Burial test performance requirements

Physical Properties and Typical Values

PROPERTY ASTM TEST METHOD U.S. VALUE METRIC
VALUE
WEIGHT D-751 78 LB / 1000 FT SQUARED 38.1 KG / 100 M SQUARED
THICKNESS D-5199 20 MIL .50 MM
LOAD @ YIELD D-882 33 LBF 147 N
LOAD @ BREAK D-882 65 LBF
3380 PSI
289 N
23 MPA
ELONGATION @ BREAK D-882 500% 500%
TONGUE TEAR D-2261 28 LBF 124 N
TRAPEZOIDAL TEAR D-4533 40 LBF 178 N
PPT RESISTANCE D-2582 50 LBF 222 N
DART IMPACT STRENGTH D-1709 3.5 LBS 1.6 KG
PUNCTURE STRENGTH D-4833 40 LBS 177.9 MPA

IMPORTANT NOTE: Small cuts of Permalon more than likely can go UPS. However, this product can get a little heavy and therefore has to go motor freight if it's over 150lbs. Rest assured, we'll call you if it's a heavy order with a freight quote.




Your IP Address is: 3.236.51.151