FREE Pond Building Classes Coming Soon! Industry Secrets of the . . . . "How To".  Call to Register

English  

Sponsors

FREE Pond Building Classes Coming Soon! Industry Secrets of the . . . . "How To".  Call to Register

Manufacturers


Carry Pump Strainer Screen 1.5-2 hp (V)

$317.00


 1-1/2hp 1ph 3wire or 3ph or 2hp 3ph Strainer Screen (Vertical)
PVC and High Density Polyethylene Strainer Screens: The PVC Strainer Screens are manufactured with SDR35 PVC pipe and high density polyethylene (HDPE) top and bottom sections. The screen portion is perforated with 1/2in. holes. These holes make up 37 to 40 percent of the surface area of the screen and allow for water flow while restricting debris from reaching the pump. They are designed to enclose the Stainless Steel Axial-Flow submersible pumps and help prevent debris from clogging the pump and causing motor damage. They do not impede the flow of water past the pump. CMI strongly recommends these screens in areas where debris or muck is likely to be contained in the water surrounding the pump. Strainer screens are available for either vertical or horizontal style pumps.
  • Model: CMI40441
  • Shipping Weight: 12lbs
  • Manufactured by: CMI

Be the first to write a review.  Write a Review.



Your IP Address is: 18.188.175.182